FEATURED PRODUCT

Miller-Moorehead Laminate Slitter

0 review(s)

Specifications 1/4HP, 60CY, 1PH Type: M-GN Frame: 48-1 Power: 115V 60Hz 1Ph Gear Ratio: 180 Amps: 6.25 Rpm: 100 Motor rpm: 1725

NEW PRODUCT

Delta 11-990 Table Top Drill Press

0 review(s)

Features and Specs 12″ Bench top model 1/3hp 1720 rpm 115 V 60amp 60hz 1ph 2-3/8″ spindle travel (8) drilling speeds ranging from 620 – 3,100 RPM 1/2″ chuck cap. 6″ chuck to column 8-1/2″ x 9-7/8″ cast iron table spindle to table 14″ max.  

Ideal 3905 Paper Cuter

0 review(s)

Ideal 3905 Paper Cuter

0 review(s)

Specification Cutting width 15 3/8″ Cutting height 1 1/2″ Narrow cut 1 5/16″ Cutting length behind blade 15 9/16″ Table length in front of blade 6 3/8″ Dimensions (D x W x H) 28″ x 30 3/8″ x 16 1/2″ Shipping weight: 95 lbs.  

Brunner 0257 Tank 250 Gallon Cap. Tank Only

0 review(s)

Specifications Maximum Allowable Working Pressure 200 PSI AT 450°F Minimum Design Metal Temperature -20°F at 200psi Capacity 250 gallons

Seco/ Kufo (King of UFO) UFO-103B 2733 CFM

0 review(s)

Specifications Motor   5HP (3.75kw) Inlet diameter   175mm (7″) X 1 Air volume 76M3/min. (2733 CFM) Bag volume 0.59M^3 (20.97 ft^3) Static pressure of water 10.55 inch Dimension: 69″ x 30″ x 55″ Net weight 115kg (253 lbs)

Davis & Wells DSA 70 Horizontal Boring Machine Twin Spindle

0 review(s)

Features Foot Pedal operation Air Hold Down Specifications 2 spindle w/ Adjustable centers 1-8″ 1hp 230/460V 3.0/1.amp 3450rpm 60hz 3ph  

Ultrafilter Model SD-0300- AP 60cfm Air Dryer

0 review(s)

Specs and Features Air Flow: 300 m3/hr. OR 5.00m3/min. Air Cooling: 290 m3/hr. Pressure Drop: .24 Bar Air Connection Size: 1½” Power Consumption: 100% ≈ .88 KW, 50% ≈ .48KW, 0% ≈ .09kw Electrical: 230V 1ph Dimensions: 24” x 26” x 24” Weight: 177 lb.

Ganner 281 Bore, Glue & Dowel Inserter

0 review(s)

Features and Specification Water & glue mix system pneumatic hold downs foot pedal control switch for cycle activation Foot treadle control (23) spindle horizontal drilling head with spindles on 32mm centers (6) pneumatic dowel injectors eight (8) gluing and insertion heads Vibratory hopper feed for dowels Dowel Sizes:  6, 8, 10 or 12mm Dowel Length: […]

Gannomat Ganner 410 Dowel Boring and Insertion

0 review(s)

Features and Specifications 38″ x 14¼” table (25) Spindle boring blocks (32 mm centers) 2 kW (3HP), 220v 8 amp Vibratory hopper feeder for dowel insertion with (6) adjustable dowel inserters Glue system is mounted inside left side door with glue and water tanks Right side mounted control station with individual controls for inserters, adjustment […]

NEWSLETTER

Sign Up for Our Newsletter

Over 35 years ago, Albright Machinery was formed to fill a need in the manufacturing industry. As former builders of manufacturing plants, we found a lack of quality service and support from machinery suppliers to the manufacturers. As a result of filling this void, Albright is the most valuable source of machinery, service, and support in the industry....