SK-720WP : 20" INDUSTRIAL PLANER
SK-724WP : 24" INDUSTRIAL PLANER

FEATURES:
• Heavy cast iron one piece frame and base
• Sealed long life ball bearings
• Heavy duty precision ground cast iron table ,
• Easy and accurate assembly of the knives
• Top rollers for returning stock
• Table raises and lowers easily
• Precision three knives cutterhead
• 3 belt drive
• belt driven feed rollers for trouble free feeding
• 4" dust port included
• Optional spiral cutterhead

SK-820WP: 20" HEAVY DUTY PLANER
SK-824WP: 24" HEAVY DUTY PLANER

FEATURES:
• Solid Cast Iron construction
• Top rollers for returning stock
• Gear driven feed rollers for trouble free feeding
• Easy access internal workings
• Heavy duty screw jack elevation
• Optional Spiral Cutterhead
• Handwheel thickness adjustment with thickness indicator
• Fast 30 FPM for mass production performance
• Dust port included

SK-824VS10: 24" VARIABLE SPEED PLANER 10HP, MOTORIZED TABLE ELEVATION, DIGITAL READ-OUT, SPIRAL CUTTERHEAD

FEATURES:
• 10HP Main motor for heavy loaded mass production and tough planning.
• Variable speed pulley driven by 2HP totally enclosed motor with change over switch
• Digital Read-Out to indicate and change the thickness of the work pieces easily
• 1/2 HP motor and Numerical Control Panel to drive the table up and down automatically and easily.
• Up to 11-3/4" planning thickness capacity
• Chip breaker and chip hoop for dust collecting
• Upper infeed and outfeed rollers are driven by pulley connected gear directly to ensure firm griping and feeding ability

SK-624VS15 / SK-626VS20: 24" / 26" VARIABLE SPEED PLANER 15HP, 20HP, MOTORIZED TABLE ELEVATION, DIGITAL READ-OUT, SPIRAL CUTTERHEAD

FEATURES:
• Superior 15HP(SK-624VS15) & 20HP(SK-626VS20)
• Up to 11-3/4" large planning thickness capacity
• Infinitely Variable Speed: 16-1/2-72 FPM is adjusted by the large control knob
• Motorized Table Elevation: power up and down table and minor adjustment by knob
• Digital Read-Out to indicate workpiece thickness
• Table rollers can be individually adjusted by two knobs at front
• Industrial motor drives the cutterhead with Triple-V belts
• 2 of 5" Dust hood outlet & Sectional Chipbreaker
• Anti-kickback fingers are provided in front of the infeed roller to ensure maximum safety for the operator
• Solid Cast-iron construction

SK-840VS20 / SK-855VS25: 40" / 55" AUTOMATIC PLANER 20HP, 25HP, MOTORIZED TABLE ELEVATION, DIGITAL READ-OUT, SPIRAL CUTTERHEAD

FEATURES:
• Superior 20HP(SK-840VS20) & 25HP(SK-855VS25) • Digital Read-Out to indicate workpiece thickness
• Up to 11-3/4" large planning thickness capacity • 4" Dust hood outlet & Sectional Chipbreaker
• Variable Speed: 10-50 FPM is adjusted by the large • Anti-kickback fingers are provided in front of 1 control knob roller to ensure maximum safety for the open
• Motorized Table Elevation • Heavy sheet metal cabinet stand for durability

The W&H Molder's low cost and its capacity to produce high quality moldings is an unbeatable combination.
The machine takes little room in your shop and gives you control of your lead times, costs, and quality.
The W&H Molder provides a safer alternative to a shaper and makes the entire profile in one pass. Some deep and wide profiles require prior relief cuts.
The machine uses a two-knife system. Knife placement is preset. No time is lost in setting knives with a gauge.

Specifications
• 2 hp motor
• 7000 rpm arbor
• 15 fpm feed rate
• max profile depth 3A"
• max profile width Q%"
• planes 7" wide
• min stock length 9"
• min stock thickness W
• max stock thickness 8"
All molding cuts must be at full depth and made in a single pass.
• working height 31"
• overall height 45"
• overall width 20"
• overall length 33"
• pkg. wt. approx. 220#

Warranty
7-year limited warranty against defects in materials and workmanship, non-transferable.
The motor is covered under its own 1 -year warranty.