 Sanders
 Biesse
BIESSE SAND - LEVIA 95-110-135
|
|
The Levia series Artech Line sanding machines have been specially designed to give the craft industry access to automatic calibrating and sanding technology with high quality results. The technical solutions adopted, the sturdiness of the structure, the functional design and the care taken down to the smallest detail undoubtedly place this machine at the top of its category.
Composition rk:
- First operating unit equipped with: 150 mm diameter grooved steel calibrating roller
- Second operating unit equipped with: 150 mm diameter 45 Sh rubber coated roller Stiff sanding pad
Composition rr:
- First operating unit equipped with: 150 mm diameter grooved steel calibrating roller
- Second operating unit equipped with: 190 mm diameter 45 Sh rubber coated roller
In the design of the Levia sanding machines, particular attention has been devoted to the needs of the machine operator. This concept has been reflected in the design of a simple yet functional control panel that is easily understandable, and in the measures adopted to simplify its use and minimizes the machine setup times. |
TOP
KUFO
WOODWORKING SANDERS
SK-37DS DRUM SANDER
 |
|
SK-3000SD OSCILATING BELT AND SPINDLE SANDER
 |
FEATURES
• Easily operate with high performance for sanding flat objects.
• Might gauge metal cabinet stand.
• Rubber coated and steel sanding drum for precision sanding finish.
• Lower and raise table easily by large hand wheel.
• Converter infeed for fast sanding.
• Precision drum and table level with in 0.004" from right to left.
• Two different grits and level sanding drums for fast sanding and smooth surface.
• Three press rollers keep the object flat on sanding table.
• Magnetic control overload protection.
WIDE BELT SANDERS
SK-2548WB: 25" WIDE BELT SANDER (ECONOMIC SERIES)
 |
|
FEATURES
• Adjustable platen
• Adjustable rubber coated feed roller
• Easy access feed belt adjustment
• Oversized handwheel for feed belt height adjustment
• Emergency shout off buttons
• Front and rear emergency stops
• Precision venire scale |
FULLY EQUIPPED INDUSTRIAL STRENGTH SERIES WIDE BELT SANDER
MORE MODELS AND CUSTOM MADE UNITS ARE AVALIABLE UPON REQUEST:
 |
|
FEATURES:
• Rugged heavy duty metal construction
• Centralized operation control for easy and clear working
• Precision and heavy duty table movement system with four pillars to raise and lower quickly and accurately
• Full power motors drive sanding and auto in-feed smoothly
• Precision balanced contact drum covered by the proper rubber
• In feed and out feed is spring loaded hold down roller to ensure positive feeding
• Sanding belt changes easy and fast due to the full opening side doors
• Sanding head with a quick release and lock down designed for removal or loading of sanding belt
• Computerized table adjustments with accurate digital read out for thickness accuracy.
• Infrared belt tracking
• Variable feed speeds for various applications
|
FINISH WIDE BELT SANDER
INNOVATIVE IRREGULAR SANDER DESIGNED FOR SOLVING IRREGULAR SANDING PROBLEMS EASILY AND QUICKLY
 |
|
Exclusive Panel Pressure Device
The panel pressure device is specially designed to handle small pieces of stock. It requires no vacuum saving space and cost.
Simultaneous Longitudinal and Cross Sanding
The new machine structure consists of two reversible crosswise brush spindles, combined with reversible running and reciprocating of 4-5 short longitudinal brush spindles, permitting cross and longitudinal sanding to be performed simultaneously. Any type of irregular surface can be sanded easily and quickly
Convenient Sanding Belt Replacement
Simply loosen two screws, and the sanding belt or brush can be conveniently and quickly
replaced. No dismantling of bearings is necessary. |
APPLICATIONS
Surface and Lacquered Panel Sanding
• Solid Wood, Veneer
• Lacquered Panel Sanding
• Burr Cleaning
Irregular Surface Sanding
• Sculptured Panels
• Bas-relief or Beehive
• Various Profiles of Panel Inserts, Window and Door Frames, Sculptured Doors
|
SPIRAL CUTTER HEAD PLANER & WIDE BELT SANDER
 |
|
A combination of Planner and Sander
• The first station is a knife planer head followed with a contact drum head at second station and platen head at third station (DMA Type)
• Head configuration can be made to meet customer's requirement.
• Choice of double or three heads.
Spiral Cutterhead
Chaning knife inserts are conveniently made without removing the cutterhead. The spiral cutterhead is precision machined from special aluminum alloy steel by CMC machine center, tempered and precision ground. The spiral cutterhead is fitted with throw-away, four edge knife inserts for outstanding cutting performance. |
TOP
UNIQUE MACHINES
 |
|
Using the same heavy-duty conveyor and hold-down system as the larger Model 325, The Model 336 adds the capability to shape & sand raised panel arches. Single tool capacity on its one shaper & two sander stations make this machine ideal for dedicated, high volume production. Digital indicators assist in fast tooling change-overs, allowing the same machine to be used for raised panel & edge detail shaping & sanding. The variable speed conveyor and sanding spindles give the operator maximum control for the best possible finish. Tilting sanding stations will accept a wide variety of sanding heads. Industrial duty construction along with precision adjustment capability make the model 336 the best value in its class.
RIGID FABRICATED STEEL FRAME
HEAVY-DUTY VARIABLE SPEED CONVEYOR WITH REPLACEABLE PADS
5 STAGGERED ROWS OF HOLD-DO
WN ROLLERS
VARIABLE SPEED, REVERSIBLE & TILTING SANDING STATIONS
VARIABLE SPEED REVERSIBLE
SHAPER STATION
SHAPE & SAND RAISED PANEL ARCHES
HEAVY-DUTY PRECISION IN FEED FENCE
USER FRIENDLY DIGITAL
POSITION INDICATION
INFEED SAFETY SWITCH
|
TOP
Costa & Grisson
TOP
|
Contact Us 
